22 Gauge Aluminum Sheet

The approximate thickness of 22 gauge aluminum sheet is 0.0253 inch, in millimeters is 0.643 mm. Different materials present different thicknesses of the same gauge number. A sheet of aluminum has a gauge starting at .010” and going up to .170”. The thickness of a aluminum sheet size can be anywhere from .188” and up. Sheet gauges are sold according to gauge or decimal equivalent, they normally require a caliper to determine thickness.

Thickness and rolling process is not necessarily related: here to say is not thin aluminum sheet are cold-rolled, because hot-rolled aluminum coil can also be further processed through cold-rolled equipment, become hot-rolled 22 gauge aluminum sheet, but one thing can be sure is aluminum sheet with thickness higher than 8 millimeters is hot-rolled aluminum sheet, because cold-rolled equipment can not produce the thickness of aluminum sheet above 8mm.

There is a national standard inside the aluminum sheet thickness, but the standard set a large range of tolerances, if the user needs aluminum sheet thickness needs to be done in accordance with the state under the tolerance, can save a lot of money, of course, this point needs to be based on the order requirements, Haomei Aluminum produce 22 gauge aluminum sheet according to the user order requirements production, thickness tolerance control in 0.01mm, while the national standard tolerance is quite large, than three millimeters of aluminum sheet thickness can be done 2.7mm, and this is also meet the standard, so this point hopes that users pay attention to, if there are sales enterprises to you that according to theoretical weight settlement, you have to beware of the trap, which is quite a large space, buy aluminum sheet we suggest that you choose a regular enterprise, do not because of the small profit and deceived.